Volkswagen Caddy

  1. Pull out the steering wheel.
  2. Unscrew the Torx screw with a T25 screwdriver.
  3. Remove the upper cover.
  4. Unscrew the two screws on the right and left sides of the steering wheel using a Torx screwdriver with a T25 tip.
  5. Remove the lower cover of the steering column.
  6. Unscrew the two breakaway screws holding the ignition switch on the right and left sides of the steering wheel.
  7. Use a flat screwdriver, striking it with a hammer in the direction of unscrewing.
  8. Disconnect the ignition plug from the module.
  9. Tilt down the latch holding the ignition switch.
  10. Disconnect the immobilizer coil plug.
Scroll to Top