Skip to content
- Pull out the steering wheel.
- Remove the upper cover of the steering column.
- Using a Torx screwdriver, unscrew the screws from the bottom and from the left and right sides of the lower cover. Pull the housing down.
- Unscrew the small screw holding the module under the steering column.
- Disconnect the power plugs from the module.
- At the front of the module, use a rod to unclip the front latch. Press the second latch with your finger between the plugs at the back.
- Demonstration of disconnecting the module from above in point 6.
- Use a drill to drill out the breakaway screws (4.5 mm drill bit).
- Select a Torx bit slightly larger than the drilled hole and drive it into the screw, then unscrew it.
- Bend back the latches on the left and right sides, and remove the ignition switch. Disconnect the plug from the immobilizer coil.